Views: 0 Author: Site Editor Publish Time: 2026-08-19 Origin: Site
Automated Output Still Requires
Controlled Checkpoints
Automated winding supports repeatable, high-volume output,
but it does not complete the quality assurance process.
After winding, units move through controlled transfer,
electrical verification, visual inspection, tape-layer
verification, marking confirmation and protective packing.
Efficiency comes from automation.
Consistency is protected by controlled checkpoints.
Controlled Transfer Between
Production Stages
Products are transferred from production trays into
organized handling trays. Separation and consistent
orientation make subsequent inspection easier and provide
clearer access to terminal pins, winding leads and core
edges.
Electrical Verification Before
Final Release
Electrical parameters are verified with a dedicated fixture
before the products proceed to subsequent inspection,
marking and packing. Consistent fixture positioning
supports repeatable checks against the applicable
inspection requirements.
Dedicated fixture used for controlled electrical verification.
Visual Integrity After Soldering
and Handling
After terminal soldering and product transfer, the
assembly condition is checked again. Inspection focuses
on core-edge condition, terminal completeness and
alignment, tape condition, and overall product integrity.
TERMINAL CONDITION REVIEW
Tray Arrangement Is Part of
the Inspection Process
Tray arrangement serves a quality-control function rather
than a presentation purpose. Consistent orientation makes
visual comparison easier, helps identify irregularities,
and prepares the batch for subsequent marking.
Double-Layer Tape Application
Is Verified
Similar-looking assemblies can differ in tape-layer
execution. A side-by-side reference helps verify the
required two-layer application, tape coverage, overlap and
edge position before the product proceeds to marking.
Marking Is Checked Before
Packing
Before packing, product markings are reviewed for
presence, legibility and format consistency. Missing,
incomplete or unclear characters are identified before
the products enter the final packing stage.
Packing Begins Only After the
Checks Are Complete
Products that complete the required checks are placed in
protective trays and packed in an orderly orientation.
The tray format keeps units separated and helps protect
terminals during subsequent handling.