Views: 0 Author: Site Editor Publish Time: 2026-07-21 Origin: Site
Transformers and inductors are critical components in power conversion, filtering, energy storage, electrical isolation and electromagnetic interference control.
In many applications, standard components can provide a practical and cost-effective solution. However, an off-the-shelf part may not meet every electrical, mechanical, thermal or insulation requirement.
This is especially common in power supplies, industrial electronics, automation equipment, LED drivers, communication systems, automotive electronics and new energy equipment.
When the required inductance, turns ratio, current capacity, dimensions, pin configuration or temperature rise cannot be achieved with a standard component, a custom transformer or inductor may be necessary.
Successful customization does not begin with selecting a model number. It begins with understanding the complete operating conditions of the system.
A standard transformer or inductor may be suitable when its electrical ratings, dimensions and mounting structure already match the application.
Customization becomes more valuable when a project involves one or more of the following requirements:
A specific turns ratio, inductance or current rating
Limited PCB space or restricted product height
A special pin layout, mounting method or mechanical structure
Higher isolation or insulation requirements
Controlled leakage inductance or parasitic capacitance
Strict temperature-rise or efficiency targets
High-current or high-frequency operation
Special shielding, potting or moisture-protection requirements
Automated SMT or through-hole assembly requirements
Stable long-term supply for volume production
A custom component should not be considered only as a replacement for a standard part. It should be evaluated as part of the complete power electronics system.
The correct design may help reduce PCB space, improve electrical performance, simplify assembly or provide a more reliable production solution.
A model number alone is not a complete transformer or inductor specification.
Components with the same core size or external appearance may have completely different winding structures, wire sizes, insulation systems and electrical characteristics.
Before a manufacturer can evaluate a custom magnetic component, the following information should be defined as clearly as possible.
The manufacturer should understand where and how the component will be used.
Typical applications and circuit topologies include:
Flyback converters
Forward converters
Push-pull converters
Half-bridge or full-bridge converters
DC/DC converters
PFC circuits
EMI filters
Energy-storage inductors
Common-mode filters
Gate-drive circuits
Auxiliary power supplies
The circuit topology directly affects the voltage and current waveforms, magnetic flux conditions, insulation structure and winding arrangement.
For a transformer project, useful information includes:
Minimum and maximum input voltage
Output voltage and current
Number of outputs
Switching frequency
Duty cycle
Output power
Turns ratio
Isolation voltage
Expected efficiency
Maximum allowable temperature rise
For an inductor project, the manufacturer may also need:
Nominal inductance
Inductance tolerance
RMS current
Peak current
Saturation current
DC resistance
Ripple current
DC bias conditions
Providing realistic operating ranges is more useful than supplying only nominal values.
Current and voltage waveforms can strongly influence magnetic losses.
A component tested with a low-frequency sine wave may behave differently when operated with a high-frequency switching waveform.
When available, customers should provide:
Circuit diagrams
Waveform screenshots
Duty-cycle information
Peak and RMS current values
Switching frequency range
Existing sample data
Previous test results
This information helps the manufacturer evaluate the component under conditions closer to its intended application.
Core material selection affects magnetic loss, saturation behaviour, temperature performance, dimensions and cost.
No single material is suitable for every transformer or inductor.
Ferrite materials are widely used in high-frequency transformers, common-mode chokes and various switching-power applications.
Their typical advantages include:
Relatively low high-frequency core loss
Good electrical resistivity
Broad availability in standard core shapes
Suitability for compact high-frequency components
The final material grade should be selected according to operating frequency, flux density, temperature and required power level.
Powder-core materials are frequently used in power inductors, PFC inductors and energy-storage applications.
Depending on the material system, they may offer:
Distributed air gaps
Gradual saturation characteristics
Good DC bias performance
Suitability for high-current energy storage
Common material families include iron powder, Sendust, High Flux and MPP.
Each has different characteristics in terms of core loss, permeability, DC bias performance and cost.
Amorphous and nanocrystalline materials may be considered for applications requiring high permeability, high saturation flux density or effective common-mode noise suppression.
However, material selection should not be based only on permeability or saturation values.
The manufacturer must also consider:
Operating frequency
Core geometry
Winding method
Temperature range
Mechanical structure
Material availability
Production cost
The best material is the one that meets the complete system requirement rather than the one with the highest individual specification.
The winding structure affects copper loss, leakage inductance, parasitic capacitance, insulation, manufacturability and production consistency.
The conductor should be selected according to RMS current, peak current, allowable temperature rise and available winding space.
Using a larger wire can reduce DC resistance, but it may also reduce the available winding space and make insulation or assembly more difficult.
The design must balance electrical performance with production feasibility.
At higher switching frequencies, AC resistance can become significantly higher than DC resistance.
This is caused mainly by skin effect and proximity effect.
Possible methods for reducing AC winding loss include:
Selecting an appropriate single-wire diameter
Using multiple parallel wires
Using Litz wire when technically and economically appropriate
Using foil windings for suitable high-current applications
Optimizing the number of winding layers
Adjusting the winding sequence
Litz wire can help reduce high-frequency conductor loss, but it is not automatically the best option for every project.
Its strand diameter, number of strands, winding method, termination process and cost must all be evaluated.
Interleaving primary and secondary windings can reduce leakage inductance in certain transformer designs.
However, increased interleaving may also increase interwinding capacitance.
This means that leakage inductance and parasitic capacitance cannot always be minimized at the same time.
The winding structure should therefore be designed according to the circuit’s switching behaviour, EMI requirements and insulation limits.
Transformer and inductor temperature rise is usually affected by a combination of:
Core loss
DC copper loss
AC winding loss
Ambient temperature
Airflow
Enclosure structure
Mounting position
Duty cycle
Nearby heat sources
A component with acceptable room-temperature test results may still overheat inside a sealed enclosure or near other power components.
For this reason, customers should define:
Maximum ambient temperature
Expected continuous operating time
Natural or forced-air cooling conditions
Enclosure type
Maximum permissible component temperature
Maximum allowable temperature rise
Depending on the application, thermal management may involve:
Natural convection
Forced-air cooling
Increased conductor cross-section
Lower-loss magnetic materials
Improved winding arrangements
Thermally conductive potting compounds
Heat-spreading structures
Mechanical contact with the product enclosure
Potting can improve moisture resistance, vibration resistance and heat transfer in some applications.
However, it also affects cost, repairability, insulation stress and production processing. It should therefore be selected according to the actual application requirements.
Magnetic components interact directly with the switching behaviour and EMI performance of a power converter.
Important parameters may include:
Leakage inductance
Interwinding capacitance
Winding-to-core capacitance
Common-mode coupling
Differential-mode impedance
Magnetic-field distribution
Low leakage inductance is important in many transformer applications, but some converter topologies may use a controlled amount of leakage inductance as part of the circuit operation.
Similarly, reducing interwinding capacitance can help control common-mode noise, but it may require a different winding arrangement that affects leakage inductance.
Possible EMI-related design methods include:
Optimizing the winding sequence
Controlling winding overlap
Using margin winding structures
Applying electrostatic shielding where appropriate
Adding external copper shielding
Selecting suitable common-mode chokes
Coordinating the magnetic design with the PCB return path
An electrostatic shield can reduce capacitive coupling between transformer windings, but its effectiveness depends on its position, connection and construction.
The shield must also be designed carefully to avoid forming an unintended shorted turn.
EMI performance should therefore be evaluated at system level, not only from the transformer or inductor datasheet.
Insulation requirements must be considered at the beginning of the design process.
They influence:
Bobbin selection
Creepage and clearance distances
Winding margins
Insulation tape
Wire type
Layer insulation
Insulation barriers
Potting materials
Terminal spacing
The customer should identify:
Working voltage
Required withstand voltage
Basic, supplementary or reinforced insulation requirements
Pollution degree
Overvoltage category
Insulation class
Applicable end-product standard
Target market
Depending on the project, the design may use:
Margin tape
Insulation barriers
Sleeving
Triple-insulated wire
UL-recognized insulation materials
Class B, F or H insulation systems
Using recognized materials does not automatically mean that the complete transformer, inductor or end product is certified.
Final compliance depends on the complete construction, insulation system, application and applicable product standard.
Customers should communicate certification and compliance requirements before prototype production.
Electrical performance is only one part of a successful design.
The component must also fit the customer’s PCB, enclosure and assembly process.
Important mechanical information includes:
Maximum length, width and height
Pin spacing
Pin diameter
Pin length
Vertical or horizontal mounting
Through-hole or surface-mount assembly
PCB pad dimensions
Clearance from surrounding components
Weight limitations
Vibration requirements
Packaging method
For surface-mount components, the design should also consider:
Pick-and-place compatibility
Coplanarity
Tape-and-reel packaging
Reflow temperature
Terminal solderability
Component weight
For through-hole products, pin straightness, pin length, solderability and mechanical stability may be more important.
Mechanical drawings should be confirmed together with the electrical specification before sample production.
Custom magnetic component development is usually an iterative process.
A practical development workflow may include the following stages.
The manufacturer reviews:
Electrical parameters
Mechanical dimensions
Pin configuration
Winding requirements
Insulation structure
Material availability
Testing requirements
Production feasibility
Any unclear or conflicting requirements should be discussed before production begins.
Initial samples are produced to verify:
Winding structure
Material selection
Assembly method
Mechanical fit
Electrical performance
Production feasibility
Available standard cores and bobbins can often shorten development time.
New tooling or special materials may require a longer evaluation period.
Depending on the product and project requirements, inspection may include:
Inductance
Turns ratio
DC resistance
Leakage inductance
Quality factor
Insulation resistance
Withstand voltage
Pin dimensions
Appearance
Solderability
Additional testing may be required for high-voltage, automotive, outdoor or high-reliability applications.
Customers should test prototypes under actual or representative circuit conditions.
This may include:
Startup and full-load testing
Temperature-rise testing
Waveform testing
EMI testing
Short-circuit or overload testing
Environmental testing
Mechanical-fit confirmation
Feedback from the customer can then be used to adjust the design where necessary.
Before volume production, the approved sample, drawing, bill of materials and process requirements should be confirmed.
Key production controls may include:
Approved material suppliers
Winding instructions
Insulation requirements
Process inspection
Electrical testing
Appearance criteria
Packaging requirements
Lot identification
Traceability
A design that works for one laboratory sample must also be suitable for stable batch production.
Possible sources of variation include:
Core permeability tolerance
Air-gap tolerance
Wire-diameter tolerance
Winding tension
Number and position of winding layers
Soldering temperature
Pin alignment
Material-lot differences
Manual assembly variation
A reliable custom component should be designed with realistic production tolerances.
Manufacturers should avoid structures that depend on extremely difficult manual adjustments unless the application genuinely requires them.
Important characteristics should be defined with reasonable tolerances rather than ideal single-point values.
Production consistency can be supported through:
Approved samples
Controlled drawings
Material identification
Standardized work instructions
First-piece inspection
In-process inspection
Final electrical testing
Batch traceability
Choosing a supplier involves more than comparing unit prices.
A suitable manufacturing partner should be able to understand both the electrical design and the production process.
Customers should evaluate whether the supplier can provide the following capabilities.
The supplier should be able to review drawings, specifications, samples and application information before quoting or production.
A responsible manufacturer should identify unclear or conflicting requirements rather than simply copying a sample without evaluation.
The supplier should have a defined process for:
Material confirmation
Prototype winding
Mechanical inspection
Electrical testing
Sample documentation
Design revision
The required test capability depends on the component.
For common custom transformers and inductors, this may include:
LCR measurement
Turns-ratio testing
DC resistance testing
Leakage-inductance testing
Insulation-resistance testing
Withstand-voltage testing
Appearance and dimensional inspection
Special tests should be confirmed according to the project rather than assumed to be included in every quotation.
Customers should confirm how the supplier controls:
Magnetic cores
Bobbins
Enameled wire
Insulation tape
Varnish
Sleeving
Terminals
Potting compounds
Material substitutions should not be made without evaluation and approval when they could affect electrical performance, insulation or reliability.
Prototype production and volume manufacturing require different controls.
The supplier should be able to explain how an approved sample is transferred into batch production through controlled drawings, bills of materials, winding instructions, inspection standards and traceability records.
Providing complete information helps the manufacturer evaluate the project more accurately and reduces unnecessary development cycles.
Customers can provide:
Product drawing or specification
Circuit diagram
Existing sample
Application description
Input and output parameters
Switching frequency
Inductance or turns ratio
RMS and peak current
Insulation and withstand-voltage requirements
Maximum dimensions
Pin configuration
Operating temperature
Required certifications or compliance
Estimated annual quantity
Target sample and production schedule
When some parameters are not yet available, a reference sample and application description can still provide a useful starting point.
However, final production should be based on an approved specification rather than only on external appearance or a model number.
Custom transformers and inductors should be developed as part of the complete power electronics system.
Core material, winding structure, conductor selection, insulation, temperature rise, EMI behaviour, mechanical dimensions and production consistency are closely connected.
Improving one parameter may affect another. For example:
Reducing leakage inductance may increase parasitic capacitance.
Increasing wire size may reduce copper loss but limit winding space.
Adding insulation may improve safety but reduce the available winding area.
Miniaturizing the component may increase temperature rise.
Potting may improve environmental protection but increase cost and process complexity.
For this reason, early communication between the customer, circuit engineer, mechanical designer and magnetic component manufacturer is important.
Infinity Technology supports custom transformers, inductors, common-mode chokes, coils and other magnetic components for OEM and ODM applications.
Our project process can include drawing and specification review, sample development, electrical inspection, structure confirmation, production preparation and batch manufacturing support.
For an initial project evaluation, customers can provide a drawing, datasheet, reference sample or application requirements.
Have a custom transformer or inductor project?
Contact Infinity Technology for an initial engineering and manufacturing evaluation.
The most useful information includes circuit topology, input and output voltage, output current, switching frequency, turns ratio, power level, insulation requirements, maximum dimensions and estimated quantity.
A drawing, circuit diagram or reference sample can also support the initial evaluation.
Yes. A reference sample can be used to evaluate dimensions, winding structure, materials and electrical characteristics.
However, sample replication should be supported by confirmed operating parameters. External appearance and a model number alone may not provide enough information for a reliable production specification.
Lead time depends on core and bobbin availability, winding complexity, tooling requirements, materials, testing scope and the number of design revisions.
Projects based on available materials and established structures can usually proceed faster than projects requiring new tooling or special materials.
Not necessarily.
Custom projects may involve prototype, tooling or engineering costs. However, an optimized custom component may reduce PCB space, simplify assembly, improve system performance or avoid using an oversized standard component.
The correct comparison should consider total system cost rather than only the unit price of the magnetic component.
UL-recognized insulation materials or insulation systems can be selected according to project requirements and material availability.
However, the use of recognized materials does not automatically certify the complete component or end product.
The final construction must be evaluated according to the applicable safety requirements.
A transformer normally transfers electrical energy between two or more windings and may provide voltage conversion or electrical isolation.
An inductor normally stores energy, controls current ripple or filters electrical noise.
Both products require evaluation of core material, winding structure, current, frequency, temperature and mechanical requirements.